Selecione o site do seu país/regiao

Fluke 62 MAX+/T+PRO/1AC IR Thermometer, T+PRO Voltage Continuity Tester and Voltage Detector Kit

  • Fluke 62 MAX+/T+PRO/1AC IR Thermometer, T+PRO Voltage Continuity Tester and Voltage Detector Kit

Características principais

Fluke 62 MAX+ Infrared Thermometer

  • Dust and water-resistant: IP54 rated.
  • Rugged: 3-meter (9.8-foot) drop tested.
  • Ergonomically designed: Completely redesigned for a more natural hand fit.
  • Distance to spot: 12:1.
  • Dual lasers: Identifies area to be measured.
  • Large, backlit display: Makes data easier to read, even in dark areas.

Fluke T+PRO Voltage and Continuity Tester

  • 3 forms of AC/DC voltage detection: light, sound, and vibration.
  • Extra heavy-duty, replaceable test leads.
  • CAT IV 600, CAT III 1000 V safety rated.
  • Continuity beeper.

Fluke 1AC-II VoltAlert™ Non-Contact Voltage Detector

  • Voltbeat™ technology and continuous self-test, so always know it’s working.
  • Upon detection of voltage, tip glows and beeper sounds.
  • Voltage detection of 90 to 1000 VAC.
  • CAT IV 1000 V for added protection.

Fluke C115 Soft Case

  • Lightweight soft case to provide optimal protection and accessory storage.
Compre já

Descrição do produto: Fluke 62 MAX+/T+PRO/1AC IR Thermometer, T+PRO Voltage Continuity Tester and Voltage Detector Kit

The rugged Fluke 62 MAX+ IR thermometer teamed with the full featured T+PRO voltage continuity tester and the easy-to-use 1-AC-II non-contact voltage detector, has everything you need to solve problems quickly. Use the IR thermometer to test for overheating in electrical devices, next use the electrical test tools to learn more about the problem safely and conveniently.

Especificações: Fluke 62 MAX+/T+PRO/1AC IR Thermometer, T+PRO Voltage Continuity Tester and Voltage Detector Kit

Fluke 62 MAX+ Infrared Thermometer

Specifications
Temperature range -30°C to 650°C (-22°F to 1202°F)
Accuracy ±1.0°C or ±1.0% of reading, whichever is greater
-10°C to 0°C: ±2.0
-30°C to -10°C: ±3.0
Response time (95%) < 300 ms (95% of reading)
Spectral response 8 to 14 microns
Emissivity 0.10 to 1.00
Optical resolution 12:1 (calculated at 90% energy)
Display resolution 0.1°C (0.2°F)
Repeatability of readings ±0.5% of reading or < ±0.5°C (1°F), whichever is greater
Power AA battery
Battery life 8 hours with laser and backlight on
Physical Specifications
Weight 255 g (8.99 oz)
Size 175 x 85 x 75 mm (6.88 x 3.34 x 2.95 in)
Operating temperature 0°C to 50°C (32°F to 122°F)
Storage temperature -20°C to 60°C (-4°F to 140°F), (without battery)
Operating humidity 10% to 90% RH non-condensing at 30°C (86°F)
Operating altitude 2000 meters above mean sea level
Storage altitude 12,000 meters above mean sea level
IP rating IP 54 per IEC 60529
Drop test 3 meters
Vibration and shock IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms
EMC EN 61326-1:2006 EN 61326-2:2006
Standards and agency approval Compliance EN/IEC 61010-1: 2001
Laser safety FDA and EN 60825-1 Class II
 

Fluke T+PRO Electrical Testers

Specifications
Temperature Operating -10°C to 55°C (14°F to 131°F)
Storage -30°C to 60°C (-22°F to 140°F)
Relative humidity 0°C to 30°C (32°F to 86°F): 90%
30°C to 40°C (86°F to 104°F): 75%
40°C to 50°C (104°F to 122°F): 45%
Altitude Operating 2,000 m (approx. 6,561.6 ft)
Storage 10,000 m (approx. 32,808.4 ft)
Battery type/life AAA (2); 40 hours
Shock, vibration Sinusoidal vibration per MIL-PRF-28800F for a Class 2 instrument
Safety ISA-82.02.01 (IEC 61010-1 Mod) Second Edition, CAN/CSA-C22.2 No. 61010-1 Second Edition, IEC 61010 - 1 to 1000 V CAT III/600 V CAT IV
Compliance to NFPA 70E1
AC bandwidth 45 Hz to 66 Hz
Maximum working voltage 1000 V AC/DC
Maximum measurable voltage 600 V AC/DC
Duty cycle Indefinitely for voltages up to 240 V
For voltages between 240 V and 600 V the duty cycle is 30 s on / 300 s off
For voltages above 240 V the tester must connect to a voltage source only for a MAXIMUM of 30 s and then disconnect for a MINIMUM of 300 s
Voltage hazard LED LEDs turn on at voltages > 30 V AC/DC ±35%
LED voltage indication levels 12 V, 24 V, 48 V, 120 V, 208 V, 240 V, 277 V, 480 V, 600 V
LED voltage indication levels for Canadian version 12 V, 24 V, 48 V, 120 V, 208 V, 240 V, 347 V, 480 V, 600 V
LEDs LEDs turn on between 90% and 100% of the indicated voltage on the LED, except for the 12 V LED which turns on between 50% and 100%
LCD accuracy on T+PRO only AC voltage ±(3% rdg + 2 digits)
DC voltage ±(2% rdg + 2 digits)
Resistance ±(5% rdg + 3 digits)
LCD resolution 0.1 V for voltages < 50 V, 1 V for voltages ≥ 50 V
0.01 kΩ for resistance measurement (For T+PRO Only)
GFCI test current 100 V - 150 V @ 6 mA - 9 mA AC, 150 V - 240 V < 12 mA
Standard input test current < 5 mA
Size (H x W x L) 1.3 x 2.15 x 7.6 in (3.3 x 5.46 x 19.3 cm)
Weight 9.9 oz (0.28 kg)
1. When used properly per Article 110.9 Use of Equipment (A) Test Instruments and Equipment.
 

Fluke 1AC-II VoltAlert

Specifications
Operating principle Senses the steady state electrostatic field produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.
Voltage sensing ranges Nominally, 90 VAC to 1000 VAC or 200 VAC to 1000 VAC depending on model, 45 Hz to 405 Hz; also a 20 V to 90 V control circuit model
Detector tip style Blade or round, depending on model
Light source One high intensity red LED
Agency approvals c CSA us, CE, C-Tick
Safety rating 1000 V, CAT IV
IP rating IP 40
Operating temperature -10°C to 50°C
Operating humidity ranges 0% to 95% (0°C to 30°C)
0% to 75% (30°C to 40°C)
0% to 45% (40°C to 55°C)
Operating altitude 3000 meters
Batteries 2 AAA alkaline batteries included
Product does not respond to random electrostatic discharge.

Modelos: Fluke 62 MAX+/T+PRO/1AC IR Thermometer, T+PRO Voltage Continuity Tester and Voltage Detector Kit

Fluke 62 MAX+/T+PRO/1AC

Inclui:


Compre

  • Termómetro de IR Fluke 62 MAX+
  • Verificador eléctrico Fluke T+Pro
  • Detector de tensão Fluke 1AC II VoltAlert
  • Mala flexível C115