Fluke 1AC II Non-Contact VoltAlert Tester
Fluke 1AC II Non-Contact Voltage Tester is rated
out of
5 by
44.
Key features
Fluke 1AC II is an easy to use VoltAlert tester that you can use anywhere: the perfect tool for electricians.
- Fast answers available anywhere: the tip glows red and a beeper sounds when voltage is detected
- Continuous self-test so you always know it’s working
- Voltage detection range for wide application use - 90 V to 1000 V AC or 200 V to 1000 V AC
- Volt stick with Audible/Silent mode for added convenience
Product overview: Fluke 1AC II Non-Contact VoltAlert Tester
The pocket-sized VoltAlert tester
The portable 1AC II non-contact voltage tester from Fluke is easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present. This tool is the perfect non-contact voltage tester for electricians, maintenance, service, safety personnel, and homeowners. They can quickly test for energized circuits in the workplace or at home and even detect miswires of an electrical outlet.
The tip glows red and a beeper sounds when voltage is detected
- A loud, easy to hear beeper will sound and the tip will glow red when voltage is detected
- Optionally, the beeper can be disabled for use in quiet environments
Continuous self-test so you always know it’s working
- When the tip blinks red you know it’s working properly
- Provides a continual visual indication that the 1AC II VoltAlert is on
90 V to 1000 V AC or 200 V to 1000 V AC voltage detection range for wide application use
- Wide voltage detection range allows for use in a broad range of applications
- Also available in a low voltage model from 20 V to 90 V AC for controls circuits
Safety features
- Rated to CAT IV 1000 V for added protection
- CE and CSA approved
Additional tool features
- Audible/Silent mode for added convenience in quiet environments
- On/Off button
- Batteries included
- 2 year warranty
Specifications: Fluke 1AC II Non-Contact VoltAlert Tester
Specifications | |
Operating Principles | Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage. |
Voltage sensing ranges | Nominally, 90 V AC to 1000 V AC |
Detector tip style | Flat-tip |
Light source | One high intensity red LED |
Agency Approvals | |
Safety | IEC 61010-1: Pollution Degree 2, IEC 61010-2-030: CAT IV 1000 V |
EMC | IEC 61326-1: Portable |
IP Rating | IP 40 |
Operating Temperature | -10°C to 50°C (-14°F to 122°F) |
Operating Humidity Ranges | 0% to 95% (0°C to 30°C) |
0% to 75% (30°C to 40°C) | |
0% to 45% (40 to 55°C) | |
Operating Altitude | 3000 m |
Cleaning | Clean with damp cloth |
Batteries | 2 AAA alkaline batteries included |
Battery Life | Typical battery life of greater than 1 year |
Warranty Period | Two years |
Product does not respond to random electrostatic discharge. |
Models: Fluke 1AC II Non-Contact VoltAlert Tester
Does it come with a TC
Fluke 1AC II Non-Contact Voltage Tester does not come with a thermocouple.
Date published: 2024-06-20