Fluke i3000s AC Current Clamp
Fluke i3000s AC Current Clamp is rated
out of
5 by
1.
Key features
The i3000s is a clamp-on AC Current Clamp for use with oscilloscopes and multimeters with banana input using the supplied Dual Banana to BNC Adapter.
Product overview: Fluke i3000s AC Current Clamp
Very High AC Current Clamp
Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools.
The i3000s is a clamp-on AC Current Clamp for use with oscilloscopes and multimeters with banana input using the supplied Dual Banana to BNC Adapter. The clamp is optimized for measurement on power distribution systems.
Specifications: Fluke i3000s AC Current Clamp
| Specifications | |
| Nominal current range | 30 A 300A 3000A |
| Continuous current range | 1 A - 30 A 1 A - 300 A 1 A - 3000 A |
| Maximum non-destructive current | 4000 A |
| Lowest measureable current | 1 A |
| Basic accuracy | 2% + 2 A (48-65 Hz) % reading + floorspec |
| Useable frequency | 10 Hz - 100 kHz |
| Output level(s) | 10 mv/A 1 mv/A 0.1 mv/A |
| Safety Specifications | |
| Safety | CAT III, 600 V |
| Maximum voltage | 600 V AC |
| Mechanical and General Specifications | |
| Warranty | 1 year |
| Maximum conductor diameter | 64 mm |
| Output cable length | 2.1 m |
| BNC adapter | Yes |
Models: Fluke i3000s AC Current Clamp
Fluke-i3000s
Fluke i3000s AC Current Clamp
can this be use in 87V series multimeter or 301E clamp meter to extend the current measurements
The Fluke i3000s AC Current Clamp will work with the Fluke 87V but not the 301E clamp meter.
Date published: 2024-06-16