Fluke 80i-2010s AC/DC Current Clamps

  • Fluke 80i-2010s AC/DC Current Clamps 1500x1000 - 1
  • Fluke 80i-2010s AC/DC Current Clamps 1500x1000 - 2

主要特性

  • Conveniently measure current without having to disconnect the load
  • 2,000A AC and DC current clamp
  • Maximum conductor size – 52mm (2.05in)
  • Maximum opening – 81.5mm (3.2in)

产品概述: Fluke 80i-2010s AC/DC Current Clamps

Available in packs of one, or as a three pack the Fluke 80i-2010s allows you to measure up to 2,000A AC and/or DC on large conductors with 0.8% accuracy. The 80i-2010S provides a convenient way to measure current without having to disconnect the load.

产品规格: Fluke 80i-2010s AC/DC Current Clamps

General Specifications
Modules 80i-2010s
Dimensions 110 mm x 270 mm x 46mm
Weight 0.710 kg (1.6 lbs), including battery
Output Cable 1.5 m (60 in) Shielded Coaxial cable with BNC plug
Maximum Conductor Size 52.0 mm (2.05 in)
Maximum Jaw Opening 81.5 mm
Output to Zero Auto adjustment with Zero button
Temperature Operating -10 °C to 50 °C (14 °F to 122 °F)
Storage (battery removed) -30 °C to +60 °C (-22 °F to +140 °F)
Operating Humidity ≤ 90 % RH (at 10 °C to 30 °C) ≤ 75 % RH (at 30 °C to 40 °C) ≤ 45 % RH (at 40 °C to 50 °C)
Operating Altitude 2,000 m (6560 ft)
Storage Altitude 12,000 m (40,000 ft)
Demagnetize Clamp Open and close the Clamp jaws several times with soft click, use of the clamp on uninsulated conductors is limited to 1000 Vac rms or DC and frequencies 1 kHz or less.
Safety IEC 61010-1, Pollution Degree 2, IEC 61010-2-032: CAT III 1000 V /CAT IV 600 V
Ingress Protection IEC 60529, IP40
Power Supply Type 2 x AA alkaline battery, IEC LR6
Battery Life 150 hours (typically)
Low battery indicator Yes
Electrical Specifications
Current Range 2000 A ac rms, ± 2000 A dc
Output Sensitivity 01 mV/A
Accuracy ± 0.8 % of reading ± 0.2 % of range
Bandwidth for Accuracy Specification DC to 400 Hz
Load impedance >1 MΩ and <10 pF
Frequency Response (small signal) DC to 20 kHz (-3 dB)
Temperature Coefficient 0.1 x specified accuracy for each degree C above 28 °C or below 18 °C
Working Voltage 1000 V AC RMS or DC